The Cold Spray Coating Process: A Future Technique in Material Deposition
DOI:
https://doi.org/10.51983/ajeat-2016.5.1.776Keywords:
Cold spray, coatingsAbstract
Cold Spray coatings is a material deposition technique from the broad family of thermal spray coatings with the difference of depositing spray particles at the temperature below melting point as it is a solid state process. The spray particles are impinged on the substrate with supersonic velocities. This paper imparts some light on application of this emerging technique with pros and cons. As this technique come up from last 20 years yet practical area is limited and confined to some research only. As this is a quite beneficial technique and help require from public/private sector to commercialize this technique and hope in coming years it comes up with a good growth in this area.
References
R. Lupoi and W. O'Neill, "Powder stream characteristics in cold spray nozzles," Surf Coat Technol, vol. 206, pp. 1069–1076, 2011.
R. Lupoi and W. O'Neill, "Deposition of metallic coatings on polymer surfaces using cold spray," Surf Coat Technol, vol. 205, pp. 2167–2173, 2010.
E. Irissou, J-G. Legoux, A.N. Ryabinin, B. Jodoin, and C. Moreau, "Review on cold spray process and technology: part I—intellectual property," J Therm Spray Technol, vol. 17, no. 4, pp. 495–516, 2008.
J. Villafurerte, "Current and future applications of cold spray technology," Metalfinishing, vol. 108, no. 1, pp. 37–39, 2010.
A. Choudhuri, P.S. Mohanty, and J. Karthikeyan, "Bio-ceramic composite coatings by cold spray technology," in Thermal Spray: Expanding thermal spray performance to new markets and applications (ASM International), pp. 391–396, 2009.
A.N. Papyrin, "Cold spray: state of the art and applications," in Cold spray technology, Albuquerque, pp. 1–21, 2006.
S.E. Tinashe, "Conceptual design of a low pressure cold gas dynamic spray (LPCGDS) system," M.S. Thesis, 2010.
J. Karthikeyan, "Cold spray technology: International status and USA efforts," Report by ASB Industries Inc., 2004.
A. Shkodkin, "Peculiarities of the gas dynamic spray applications in Russia," OCPS, Rusia, 2010.
J. Karthikeyan, "Evolution of cold spray technology," Adv Mater Process, vol. 164, no. 5, pp. 66–67, 2006.
S.H. Thurston, "Method of impacting one metal upon another," U.S. Patent 706701, 1902.
S.H. Thurston, "Process of coating one metal with another metal," U.S. Patent 706702, 1902.
C.F. Rocheville, "Device for treating the surface of a workpiece," U.S. Patent 3100724, 1963.
A. Papyrin, V. Kosarev, K.V. Klinkov, A. Alkhimov, and V.M. Fomin, Cold spray technology, Elsevier, Oxford, 2006.
A.P. Alkhimov et al., "Method for deposition of coatings," SU1618778, 1991.
A.P. Alkhimov et al., "Device for applying coatings," SU1618777, 1991.
V.F. Kosarev, S.V. Klinkov, and A.A. Sova, "Recently patented facilities and applications in cold spray engineering," Recent Patents Eng, vol. 1, pp. 35–42, 2007.
R.Gr. Maev and V. Leshchynsky, Introduction to low pressur gas dynamic spray, Wiley-VCH, Weinheim, 2008.
P. Heinrich et al., "Method and system for cold gas spraying," U.S. Patent 7143967, 2006.
A.P. Alkhimov, B.F. Kosarev, and A.N. Papyrin, "A method of cold gas dynamic deposition," Dokl. Akad. Nauk SSR, vol. 315, pp. 1062-1065, 1990.
A.P. Alkhimov et al., "Gas-dynamic spraying method for applying a coating," U.S. Patent 5,302,414, 1994.
A.I. Kashirin, O.F. Klyuev, and T.V. Buzdygar, "Apparatus for gasdynamic coating," U.S. Patent 6,402,050, 2002.
S. Kumar, G. Gyuyeol, and L. Changhee, "Deposition characteristics of copper particles on roughened substrates through kinetic spraying," Appl Surf Sci, vol. 255, pp. 3472–3479, 2009.
T.S. Sidhu, "Ph.D. Thesis," 2006.
C-J. Li et al., "Influence of spraymaterials and their surface oxidation on the critical velocity in cold spraying," J Therm Spray Technol, vol. 19, no. 1–2, pp. 95–101, 2010.
C-J. Li and W-Y. Li, "Deposition characteristics of titanium coating in cold spraying," Surf Coat Technol, vol. 167, pp. 278–283, 2003.
C-J. Li et al., "A theoretical model for prediction of deposition efficiency in cold spraying," Thin Solid Films, vol. 489, pp. 79–85, 2005.
C-J. Li et al., "Examination of the critical velocity for deposition of particles in cold spraying," J Therm Spray Technol, vol. 15, no. 2, pp. 212–222, 2006.
S. Yoon, C. Lee, H. Choi, and H. Jo, "Kinetic spraying deposition behavior of bulk amorphous NiTiZrSiSn feedstock," Mater Sci Eng, vol. 415, pp. 45–52, 2006.
J-G. Legoux et al., "Characterization and performance evaluation of a helium recovery system designed for cold spraying," in International thermal spray conference and exposition, Thermal Spray: Global Solutions for Future Application (DVS-ASM), pp. 560-565, 2010.
R.G. Maev, E. Strumban, V. Leshchynsky, and M. Beneteau, "Supersonic induced mechanical alloy technology and coatings for automotive and aerospace applications," Presentation at TSS Cold Spray 2004, Akron, Ohio, 2004.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2016 The Research Publication
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
