Methodology for Selecting Thermoelectric Module for Portable Vaccine Cold Box
DOI:
https://doi.org/10.51983/ajeat-2018.7.2.960Keywords:
Thermoelectric module, Peltier effect, vaccine cold boxAbstract
Vaccine cold boxes are used for storing as well as transporting vaccine at precisely controlled temperature range. The aim of this paper is to define a design methodology in selecting a thermoelectric module (TEM) for a portable vaccine cold box that maintainsan internal temperature between 2-7oC. A Cold box is designed based on the principle of thermoelectric effects (i.e. Peltier effect) wherethe cold side of the TEM is attached to the cold box for extracting the heat load and maintain the required temperature range inside it. The heat from the hot side is ejected to surrounding with the help of heat sinks and fans for the enhancement of thermoelectric performance. The study provides the methodology for the selection of available Peltier’s and usage of these Peltier’s in the design of cold box. Based on the study it is observed that the minimum temperature in the vaccine box can be reached to 5oC which indicates that the vaccine cold box can be maintained at desired temperature.
References
WHO, "Making use of Vaccine Vial Monitors Flexible vaccine management for polio," pp. 19, 2000.
F. Application, P. Data, P. E. J. Carone, R. Cited and U. S. P. Documents, "United States Patent (19)," 1996.
E. On, U. S. E. Of, T. Devices, and F. O. R. E. Cooling, "Ipack2007-33154 Evaluation on Use of Thermoelectric Devices for Electronics Cooling," in Proceedings of the ASME InterPack Conference–2007, pp. 1–5, 2007.
P. G. Manoj V Murhekar, Srihari Dutta, Ambujam Nair Kapoor, Sailaja Bitragunta and Raja Dodum, "WHO | Frequent exposure to suboptimal temperatures in vaccine cold-chain system in India: results of temperature monitoring in 10 states," WHO, 2013. [Online]. Available: http://www.who.int/bulletin/volumes/91/12/13-119974-ab/en/.
S. Kumar, A. Gupta, G. Yadav and H. P. Singh, "Embedded System," in International Conference on Recent Developments in Control, Automation and Power Engineering (RDCAPE), No. 3, pp. 314–319, 2015.
C. N. Kim and J. Kim, "Numerical Examination of the Performance of a Thermoelectric Cooler with Peltier Heating and Cooling," J. Electron. Mater., vol. 44, no. 10, pp. 3586–3591, 2015.
V. Egan, J. Stafford, P. Walsh and E. Walsh, "An Experimental Study on the Design of Miniature Heat Sinks for Forced Convection Air Cooling," J. Heat Transfer, vol. 131, no. 7, pp. 071402, 2009.
S. B. Riffat and X. Ma, "Improving the coefficient of performance of thermoelectric cooling systems: A review," Int. J. Energy Res., vol. 28, no. 9, pp. 753–768, 2004.
H. S. Lee, "Thermal Design: Heat Sinks, Thermoelectrics, Heat Pipes, Compact Heat Exchangers, and Solar Cells," in THERMAL DESIGN, 1st Ed., I. JOHN WILEY & SONS, Ed., 2010, pp. 34, 100, 102.
P. M. Teertstra, M. M. Yovanovich and J. R. Culham, "Modeling of Natural Convection in Electronic Enclosures," J. Electron. Packag., vol. 128, no. 2, pp. 157, 2006.
S. B. Riffat, S. A. Omer and X. Ma, "A novel thermoelectric refrigeration system employing heat pipes and a phase change material: An experimental investigation," Renew. Energy, vol. 23, no. 2, pp. 313–323, 2001.
L. T. Dang et al., "Thermoelectric Micro-Refrigerator Based on Bismuth/Antimony Telluride," J. Electron. Mater., vol. 46, no. 6, pp. 3660–3666, 2017.
H. J. Goldsmid, "Bismuth telluride and its alloys as materials for thermoelectric generation," Materials (Basel), vol. 7, no. 4, pp. 2577–2592, 2014.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2018 The Research Publication
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.