Influence of Plasma Sprayed Coatings on Die Life during Hot Forging Process: A State of Art Review
DOI:
https://doi.org/10.51983/ajeat-2018.7.2.901Keywords:
Plasma Spray, Coatings, Die Failure, Microstructure, Scanning Electron MicroscopeAbstract
Tooling and die failure is a prime concern for hot forging industry for survival in the competitive globe. Different methods are employed to protect the tools/dies from degradation. Thermal spraying is one of the most effective methods to protect the material from wear, thermal fatigue and plastic deformation due to adverse environments during hot forging process, thus increasing the life of material in use. A coating is a covering process that is applied to the surface of a material which is referred to as the substrate. The coating itself is either completely covered through the whole surface or the particular parts of the substrate. Different coatings are used to achieve the desired properties. In this process, relatively thick metallic, polymer, ceramic and composite coatings is deposited. The optimum coating process is selected on the basis of desired coating properties. Coating material is either in the form of wire, powder, rod, cord or molten-bath form. The procedure may be manual, mechanized or fully automated. This paper attempts to define some of the current important issues and research priorities in the plasma spray field.
References
A. Wank, "Basic of Thermal spray technology. I process," Journal of Applied Science and Engineering, vol. 20, no. 4, pp. 445-452.
"Surface Coating Methods," Tribological series, vol. 28, pp. 7-32, 1994.
"Surface Engineering in Material Science I," The Minerals Metals & Material Society.
"Thermal Spray Coating," Metal Handbook, vol. 5, Surface Cleaning, Finishing, Coating ASM Metal Park Ohio, pp. 361-374.
"Thermal Spray Tech," pp. 50-58, 1995.
"Thermal Spray Coating Technology – A Review," Materials Science and Engineering, pp. 46, 2013.
"A Review- Study of Thermal Spray Coatings for Corrosive Wear," International Journal of Advance Research, Ideas and Innovations in Technology.
"Very Low Pressure Plasma Spray – A Review of an Emerging Technology in the Thermal Spray Community," Impact Factor, 2011.
E. Pfender, "Plasma Jet Behavior and Modeling Associated with Plasma Spray Process," Thin Solid Films, vol. 238, pp. 228-241, 1994.
"Some problems Associated with Thermal Sprayed HA Coating:-A Review," International Journal of Surface Engineering & Material Technology, vol. 3, June 2013.
"Performance of Plasma Sprayed Hydroxyapatite coating:-Review," Material Fundamentals and Clinical, vol. 58, 2001, pp. 570-592.
P. Huber, "Vakuumplasmaspritzen," Oberflache Surface, vol.10, 1992, pp. 8.
"Diagnostics of Thermal Spray Plasma Jet," Thermal Spray Technology, vol. 1, pp. 117-128, 1992.
R.C. Tucker, "Thermal Spray Coating," Surf. Eng. ASM Handbook, 1994.
B. Heimann, Plasma Spray Coating, New York: VCH publishers, 1996.
"A Review on Thermal Spray coating," International Journal of Current in Engineering & Research(IJCTER), vol. 2, April, pp. 556-563, 2016.
"Surface Engineering," ASM Handbook, vol. 5, pp. 497-509.
P.E. Robert K. Betts, "An Overview of Thermal Spray process," American Galvanizer’s Association TECHFORUM, New Orleans, 2016.
G.X. Wang, X Jiang, S. Sampathed, S. Seal, N.B. Dahotre, J.J. Moore, and B. Mishra, "The Minerals Metals & Material Society," 2000.
M. Vardelle, A. Leger, A.C. Fauchais, P. & D. Gobin, "Thermal Spray Tech," pp. 50-58, 1995.
"Influence of plasma spray variable parameter on mechanical and wear behavior of plasma sprayed Al2O3 3% wt. coating Abrasion and Erosion application," Sciverse Science Direct, 2012, pp. 1689-1695.
"Effect of air plasma spray parameter on properties of YSZ and CYSZ Thermal Barriers coating," Journal of Australian Ceramic Society, vol. 52, no. 2, pp. 175-182, 2016.
"Effect of plasma spraying parameter on the microstructure and strength of TiO2 coating," International Journal of Mining, Metallurgical, and Mechanical Engineering, vol. 3, no. 4, 2015.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2018 The Research Publication
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
