Material Degradation Due to Erosion and Preventive Measures
DOI:
https://doi.org/10.51983/ajeat-2016.5.1.786Keywords:
Erosion, Particles, Hardfacing, Surface PropertiesAbstract
In industrial applications, surface of different equipments are damaged by solid particles entrained in a fluid stream. This type of wear is generally characterized as erosion. Probably the most considerable erosion problems which found in industry are those connected with the equipment used such as in coal-fired power plants, hydraulic turbines, fluid-bed system and coal purification plants etc. Erosion may come into play, when the moving particles strike-out the material from the surface of the equipment which reduces the life and efficiency of the plant equipments. The various factors named as particle shape, particle velocity, angle of impingement and properties of target material, affect the erosion rate. Hardfacing is one of simple and most effective technique to increase the erosion resistance by different welding processes. The soft surface of the component is deposited by suitable alloys or composites which enhance the surface properties. Hardfacing is a useful technique for either repair of failed components or manufacturing of new components.
References
J. R. Laguna-Camacho, A. Marquina-Chavez, J. V. Mendez-Mendez, E. A. Gallardo-Hernandez, and M. Vite-Torres, "Solid particle erosion of AISI 304, 316 and 420 stainless steels," J. of Wear, 2012, pp. 1-8.
H. Getu, J. K. Spelt, and M. Papini, "Conditions leading to the embedding of angular and spherical particles during the solid particle erosion of polymers," J. of Wear, vol. 292–293, 2012, pp. 159–168.
J. G. A. Bitter, "A Study of erosion phenomenon," J. of Wear, vol. 6, 1963, pp. 5-21.
J. Vicenzi, C. M. Marques, and C. P. Bergmann, "Hot and cold erosive wear of thermal spayed NiCr-based coatings: influence of porosity and oxidation," J. of Surface and Coating Technology, vol. 202, 2008, pp. 3688-3697.
J. H. Neilson and A. Gilchrist, "Erosion by a stream of solid particles," J. of Wear-II, 1967, pp. 111-122.
R. D. Patel and I. J. Patel, "A Review Paper on Erosion and Corrosion Behavior of Coal Combustion Chamber," International Journal for Innovative Research in Science & Technology, vol. 1, Issue 7, 2014, ISSN (online): 2349-6010, pp. 72-77.
N. Kumar, U. Yadav, and M. K. Rathi, "To study the Erosion Behavior of H.V.O.F. Coating of 16Cr5Ni at the different velocity of slurry," International Journal of Scientific & Engineering Research, vol. 4, Issue 6, 2013, ISSN 2229-5518, pp. 577-583.
K. Shimizu, Y. Xinba, and S. Araya, "Solid particle erosion and mechanical properties of stainless steels at elevated temperature," J. of Wear, vol. 271, 2011, pp. 1357–1364.
M. Naim and S. Bahadur, "Effect of microstructure and mechanical properties on the erosion of 18 Ni (250) maraging steel," J. of Wear, vol. 112, 1986, pp. 217–234.
G. R. C. Pareep, A. Ramesh, and B. DurgaParkash, "A review paper on hardfacing processes and materials," J. of Engineering sciences and technology, vol. 2, 2010, pp. 6507-6510.
S. Das and D. P. Mondal, "Solid particle erosion of al alloy and al-alloy composites: effect of heat treatment and angle of impingement," J. of Metallurgical and material transactions, vol. 35A, 2004, pp. 1369-1379.
V. Hidalgo, F. J. B. Varela, A. Menendez, and S. P. Martnez, "A comparative study of high temperature erosion wear of plasma sprayed NiCrBSiFe and WC-NiCrBSiFe coating under simulated coal fired boiler conditions," J. of Tribology International, vol. 34, 2001, pp. 161-169.
S. Lia, Y. Zuoa, and P. Ju, "Erosion–corrosion resistance of electroplated Co-Pd film on 316L stainless steel in a hot sulfuric acid slurry environment," J. of Applied Surface Science, vol. 331, 2015, pp. 200–209.
S. Matthews, B. James, and M. Hyland, "High temperature erosion–oxidation of Cr3C2–NiCr thermal spray coatings under simulated turbine conditions," J. of Corrosion Science, vol. 70, 2013, pp. 203–211.
A. P. Voinov and S. A. Voinova, "Influence of the Properties of Inert Material on External Erosion in Fluidized Bed Boilers," J. of Thermal Engineering, vol. 58, no. 12, 2011, pp. 1028–1032.
M. Dular, B. Stoffel, and B. Sirok, "Development of a erosion model," J. of Wear, vol. 261, 2006, pp. 642–655.
R. Singh, S. K. Tiwari, and S. K. Mishra, "Cladding of tungsten carbide and satellite using high power diode laser to improve the surface properties of stainless steel," J. of advances material research, vol. 585, 2012, pp. 498-501.
B. I. M. Hutching, R. E. Winter, and J. E. Field, "Solid particle erosion of material: the removal of surface material by spherical projectiles," J. of Mathematical and physical sciences, vol. 348, 1976, pp. 379-392.
I. Finnie, "Some observation on the erosion of ductile material," J. of Wear, vol. 19, 1972, pp. 81-90.
M. F. Buchely, J. C. Gutierrez, L. M. Leon, and A. Toro, "The effect of microstructure on abrasive wear of hardfacing alloys," J. of Wear, vol. 259, 2005, pp. 52-61.
E. O. Correa, N. G. Alcantara, D. G. Tecco, and R. V. Kumar, "Development of iron-based hard facing material reinforced with Fe-TiWC composite powder," J. of Metallurgical and material transactions, vol. 38A, 2007, pp. 937-945.
R. Prabu and J. Dineshkumar, "Erosion Resistant Coatings: A Review," J. of IJIET, vol. 5, Issue 2, 2015, pp. 269-272.
C. S. Ramesh and C. K. Shriniyas, "Friction and wear behavior of laser sintering iron-silicon carbide composites," J. of material processing technology, vol. 209, 2009, pp. 5429-5436.
A. Gualco, H. G. Svoboda, E. S. Surian, and L. A. Vedia, "Effect of past weld heat treatment on wear resistance of hardfacing martensite steel deposits," J. of Welding International, vol. 34, 2010, pp. 161-169.
C. Bing-quan, C. Cang-xio, and P. Jun-bo, "A high FE aluminium matrix welding filler metals for hardfacing aluminium-silicon alloys," J. of Wuhan University of Technology- material science, vol. 18, 2003, pp. 25-28.
J. Yang et al., "Microstructure and wear resistance of the hypereutectic Fe–Cr–Calloy hardfacing metals with different La2O3 additives," J. of Applied Surface Science, vol. 289, 2014, pp. 437–444.
Digambar B. and Choudhary Dr. D., "A review paper on hardfacing process materials, objectives, material, objectives and applications," J. of IJSR, vol. 3, Issue 6, pp. 2400-2403.
H. Singh, "Studies the effect of iron based hardfacing electrodes on stainless steel properties using shielded metal arc welding process," J. of research in advent technology, vol. 2, no. 4, 2014, pp. 419-430.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2016 The Research Publication
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
