Current Trends in Bio-Implants’ Research
DOI:
https://doi.org/10.51983/ajeat-2018.7.2.955Keywords:
Additive Manufacturing, Bioglass, Coating, Surface Texturing, Bio-ImplantsAbstract
Biomaterials are used for making devices that can interact with biological systems of peoples who not only suffers from congenital heart, bone or dental diseases but even sometime young and dynamic people such as sportspersons need replacements due to fracture and excessive strain. The biomaterials are commonly used in dentistry, orthopedics, plastic and reconstructive surgery, ophthalmology, cardiovascular surgery, neurosurgery, immunology, histopathology, experimental surgery, and veterinary medicine etc. Biomaterials when placed inside the human body are called bio-implants. In spite of the technological advancements in the field of medical sciences, the infection and osteomyelitis are still noteworthy after implantation. Therefore, it is need of the hour to improve the performance of traditional biomaterials. This paper summarizes some recent trends and studies, in the research field of bio-implants, which are aimed at the enhancement of current generation biomaterials.
References
G. Manivasagam, D. Dhinasekaran, and A. Rajamanickam, "Biomedical implants: corrosion and its prevention-a review," Recent Patents on Corrosion Science, vol. 2, no. 1, pp. 40–54, 2010.
B. J. Luthringer, F. Feyerabend, and R. Willumeit-Römer, "Magnesium-based implants: a mini-review," Magnesium Research, vol. 27, no. 4, pp. 142-154, 2014.
O. Johnell and J. A. Kanis, "An estimate of the worldwide prevalence and disability associated with osteoporotic fractures," Osteoporosis International, vol. 17, no. 12, pp. 1726-1733, 2006.
S. S. Babhulkar, "Osteoporotic pertrochanteric fractures (fragility fracture)," Journal of Orthopedics, Traumatology and Rehabilitation, vol. 7, no. 2, pp. 108, 2014.
K. Sinha, "Fracture alert: India faces bone ultimatum," 2016. [Online]. Available: http://timesofindia.indiatimes.com/india/Fracture-alert-India-faces-bone-ultimatum/articleshow/6018314.cms
B. Gullberg, O. Johnell, and J. A. Kanis, "World-wide projections for hip fracture," Osteoporosis International, vol. 7, no. 5, pp. 407-413, 1997.
S. Kurtz, K. Ong, E. Lau, F. Mowat, and M. Halpern, "Projections of primary and revision hip and knee arthroplasty in the United States from 2005 to 2030," J Bone Joint Surg Am, vol. 89, no. 4, pp. 780-785, 2007.
E. J. Benjamin et al., "Heart disease and stroke statistics-2017 update: a report from the American Heart Association," Circulation, vol. 135, no. 10, pp. e146-e603, 2017.
R. Kambli, "The stent saga," 2017. [Online]. Available: http://www.financialexpress.com/article/healthcare/cardiac-care-special/the-stent-saga/133121/
S. Clavijo, F. Membrives, G. Quiroga, A. R. Boccaccini, and M. J. Santillán, "Electrophoretic deposition of chitosan/Bioglass® and chitosan/Bioglass®/TiO2 composite coatings for bioimplants," Ceramics International, vol. 42, no. 12, pp. 14206-14213, 2016.
M. Monsalve, E. Lopez, H. Ageorges, and F. Vargas, "Bioactivity and mechanical properties of bioactive glass coatings fabricated by flame spraying," Surface and Coatings Technology, vol. 268, pp. 142-146, 2015.
S. Pourhashem and A. Afshar, "Double layer bioglass-silica coatings on 316L stainless steel by sol–gel method," Ceramics International, vol. 40, no. 1, pp. 993-1000, 2014.
T. Moskalewicz, S. Seuss, and A. R. Boccaccini, "Microstructure and properties of composite polyetheretherketone/Bioglass® coatings deposited on Ti–6Al–7Nb alloy for medical applications," Applied Surface Science, vol. 273, pp. 62-67, 2013.
M. M. López, J. Fauré, M. E. Cabrera, and M. C. García, "Structural characterization and electrochemical behavior of 45S5 bioglass coating on Ti6Al4V alloy for dental applications," Materials Science and Engineering: B, vol. 206, pp. 30-38, 2016.
S. Shen et al., "Bond strength and corrosion resistance of bioglass coated magnesium alloy fabricated by uniaxial pressing and microwave hybrid heating," Materials & Design, vol. 86, pp. 610-615, 2015.
K. Huang et al., "Sol–gel derived mesoporous 58S bioactive glass coatings on AZ31 magnesium alloy and in vitro degradation behavior," Surface and Coatings Technology, vol. 240, pp. 137-144, 2014.
S. Kathiresan and B. Mohan, "In-vitro bacterial adhesion study on stainless steel 316L subjected to magneto rheological abrasive flow finishing," Biomedical Research, vol. 28, no. 7, pp. 117-125, 2017.
K. A. Jagtap, R. S. Pawade, and K. V. Giradkar, "Investigations on Surface Integrity and Electrochemical Behavior of Machined Co-Cr-Mo Bio-implant Alloy," International Journal of Advanced Design and Manufacturing Technology, vol. 9, no. 4, pp. 177-189, 2016.
S. Lancaster, S. Kakade, and G. Mani, "Microrough cobalt–chromium alloy surfaces for paclitaxel delivery: preparation, characterization, and in vitro drug release studies," Langmuir, vol. 28, no. 31, pp. 11511-11526, 2012.
A. Cunha et al., "Human mesenchymal stem cell behavior on femtosecond laser-textured Ti-6Al-4V surfaces," Nanomedicine, vol. 10, no. 5, pp. 725-739, 2015.
F. Klocke et al., "Influence of electro discharge machining of biodegradable magnesium on the biocompatibility," Procedia CIRP, vol. 5, pp. 88-93, 2013.
P. H. Warnke et al., "Ceramic scaffolds produced by computer‐assisted 3D printing and sintering: Characterization and biocompatibility investigations," Journal of Biomedical Materials Research Part B: Applied Biomaterials, vol. 93, no. 1, pp. 212-217, 2010.
K. C. Kolan et al., "Fabrication of 13-93 bioactive glass scaffolds for bone tissue engineering using indirect selective laser sintering," Biofabrication, vol. 3, no. 2, pp. 025004, 2011.
X. Cui et al., "Direct human cartilage repair using three-dimensional bioprinting technology," Tissue Engineering Part A, vol. 18, no. 11-12, pp. 1304-1312, 2012.
M. Salmi et al., "Patient-specific reconstruction with 3D modeling and DMLS additive manufacturing," Rapid Prototyping Journal, vol. 18, no. 3, pp. 209-214, 2012.
J. Yang et al., "In vivo study of a self-stabilizing artificial vertebral body fabricated by electron beam melting," Spine, vol. 39, no. 8, pp. E486-E492, 2014.
S. L. Sing et al., "Fabrication of titanium based biphasic scaffold using selective laser melting and collagen immersion," International Journal of Bioprinting, vol. 3, no. 1, pp. 65-71, 2017.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2018 The Research Publication
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
