Coatings: A Review
DOI:
https://doi.org/10.51983/ajeat-2018.7.2.899Keywords:
Hot Corrosion, Thermal SprayingAbstract
To protect and safeguard a material from degradation, another material having better properties is applied on the base metal. The application of a coated material can propel the increase in life span, wear resistance or oxidation resistance of a material. Thermal spray coatings play an important role to protect the material from hot corrosion, erosion and wear. As it protects the material from this hazardous environment, it is helpful to increase service life of the material in any surrounding environment. This review paper presents the results of previous work done by different authors in the field of coating.
References
S. Chawla, H. Sidhu, A. Puri, and Prakash, "Performance of plasma sprayed nanostructured and conventional coatings," Journal of the Australian Ceramic Society, vol. 44, pp. 56-62, 2008.
A. Fauchais and M. Vardelle, "Thermal sprayed coatings used against corrosion and corrosive wear," SPCTS, UMR 7315, France, 2012.
R. Kaur, G. Singh, and Prakash, "High temperature corrosion studies of HVOF sprayed Cr3C2– NiCr coating on SAE–347H boiler steel," Journal of Thermal Spray Technology, vol. 18, no. 1, pp. 619-632, 2009.
R. Kaur, G. Singh, and Prakash, "Surface engineering analysis of D-gun sprayed Cr3C2– NiCr coating under high temperature oxidation and oxidation – erosion environments," Journal of Surface and Coating Technology, vol. 206, pp. 530-541, 2011.
L. Arrieta, O. Porcayo, J. Salinas, L. Chacon, R. Martinez, and M. Gonzaloz, "Corrosion behavior of Ni-Cr based coatings in simulated human body fluid environment," International Journal of Electro-chemical Science, vol. 6, pp. 3644-3655, 2011.
R. Kaur, G. Singh, and Prakash, "High temperature behavior of HVOF sprayed Cr3C2 – NiCr coating," Journal of Metallurgicaland Materials Transactions A, vol. 43A, pp. 2979-2993, 2012.
G. Singh, H. Singh, and H. Sidhu, "Characterization and corrosion resistance of plasma sprayed HA and HA – SiO2 coatings on Ti6Al4V," Journal of Surface and Coatings Technology, vol. 228, pp. 242-247, 2013.
V. Kumar, R. Mudgal, S. Singh, and Prakash, "Cyclic oxidation behavior of bare and Cr3C2 – 25(NiCr) coated super alloy at elevated temperature," Adv. Mat. Lett., vol. 4, no. 10, pp. 754-761, 2013.
G. Singh, H. Singh, and H. Sidhu, "In vitro corrosion investigations of plasma-sprayed hydroxyapatite and hydroxyapatite – calcium phosphate coatings on 316LSS," Bull. Mater. Sci., vol. 37, pp. 1519-1528, 2014.
R. Mudgal, G. Singh, and Prakash, "Hot corrosion behavior of some super alloys in a simulated incinerator environment at 900°C," Journal of materials engineering and performance, vol. 23, no. 1, pp. 238-249, 2014.
R. Rana, A. Jayaganthan, and Prakash, "Stepwise depletion of coating elements as a result of hot corrosion of NiCrAlY coatings," Journal of Materials Engineering and Performance, vol. 23, no. 2, pp. 643-650, 2014.
R. Mudgal, V. Kumar, S. Singh, and Prakash, "Corrosion behavior of bare Cr3C2– 25%NiCr and Cr3C2– 25%(NiCr) + 0.4%CeO2 coated superni600 under molten salt at 900°C," Journal of Materials Engineering and Performance, 2014.
R. Rana, S. Mohapatra, A. Jayagathan, and Prakash, "High temperature oxidation and hot corrosion studies on NiCrAlY coatings deposited by flame spray technique," Journal of Thermal Spray Technology, 2015.
V. Shukla, A. Jayaganthan, and R. Tewari, "Surface engineering analysis of HVOF sprayed Cr3C2 – NiCrcoating under high temperature oxidation," International Journal of Surface Engineering and Materials Technology, vol. 4, pp. 44-49, 2014.
J. Grewal, H. Sidhu, and Prakash, "Effect of sliding velocity on wear behaviour of TiAlN coatings," Advanced Materials Research, vol. 1137, pp. 24-38, 2016.
R. Rana, A. Jayaganthan, and Prakash, "Micro-structural features and oxidation behavior of nano and conventional NiCrAlY coatings developed by LVOf process," Journal of Surface and Coatings Technology, vol. 260, pp. 28-33, 2014.
R. Mudgal, G. Singh, and Prakash, "Hot corrosion behavior of bare, Cr3C2 – NiCr and Cr3C2– (NiCr) + 0.2 wt%Zr coated superni718 at 900°C," Journal of Materials Engineering and Performance, 2014.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2018 The Research Publication
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
