Dynamic Analysis of Bajaj Pulsar 150cc Connecting Rod Using ANSYS 14.0

Authors

  • Amit Kumar Department of Mechanical Engineering, Graphical Era Unervisity, Dehradun, Uttrakhand, India. 2 UCET,VBU, Hazaribagh, India.
  • Bhingole P.P. Department of Mechanical Engineering, Graphical Era Unervisity, Dehradun, Uttrakhand, India
  • Dinesh Kumar UCET,VBU, Hazaribagh, India

DOI:

https://doi.org/10.51983/ajeat-2014.3.2.727

Keywords:

Finite element modeling, dynamic analysis, connecting rod, weight reduction

Abstract

Connecting rod is an important part of i.c. Engine which form link between piston and crankshaft to convert linear reciprocating motion of the piston to the rotary motion of the crankshaft. Till now, vast research is going on in the field of metallurgy and resulted in large number of newly developed materials are available to select materials for particular applications. Focusing on this issue, in this study the connecting rod modulate and simulated for the dynamic analysis by using catia software for modelling-design of connecting rod and ansys 14.0 for dynamic analysis. Using available high strengthen alloy is used for the connecting rod of bajaj pulsar 150cc for the weight reduction to reduce moment of inertia. Dynamic analysis is carried out for determine the von mises stress, strain, and total deformation is calculated under loading conditions of compression and tension at crank end and pin end of connecting rod.

References

A. Afzal, P. Shenoy, and A. Fatemi, "Durability and Optimization of Connecting Rods," presented at the G.D.I.S. Seminar, Livonia, MI, 2004, pp. 1-20.

N. P. Doshi and N. K. Ingole, "Analysis of Connecting Rod Using Analytical and Finite Element Method," International Journal of Modern Engineering Research (IJMER), vol. 3, pp. 65-68, 2013.

J. E. Foster, "Success Story at Central Foundry: The Cast Connecting Rod," Metal Progress, pp. 60-64, 1967.

R. K. Gupta, "Recent Developments in Materials and Processes for Automotive Connecting Rods," presented at the SAE International Congress and Exposition, Society of Automotive Engineers, 1993, pp. 11-25.

W. B. James, "Powder Forging," Reviews in Particulate Materials, vol. 2, pp. 173-214, 1994.

V. Danielle, "A Comparison of Manufacturing Technologies in the Connecting Rod Industry," FIER, 2008.

R. S. Khurmi and J. K. Gupta, A Textbook Machine Design. Eurasia Publishing House (PVT.) LTD., 2005.

R. S. Khurmi and R. S. Sedha, A textbook materials science. S. Chand & Company Ltd., 2008.

B. Zheng, L. Yongqi, and L. Ruixiang, "Stress and Fatigue of Connecting Rod in Light Vehicle Engine," The Open Mechanical Engineering Journal, vol. 7, pp. 1-6, 2013.

K. K. Sudershn, K. R. Tirupath, and A. H. Syed, "Modeling and analysis of two wheeler Connecting rod," International Journal of Modern Engineering Research (IJMER), vol. 2, pp. 3367-3371, 2012.

Surajpal and Sunil k., "Design Evaluation And Optimization Of Connecting Rod Parameters Using FEM," International Journal of Engineering and Management Research, vol. 2, pp. 21-25, 2012.

Downloads

Published

09-09-2014

How to Cite

Kumar, A. ., Bhingole P.P., & Kumar, D. . (2014). Dynamic Analysis of Bajaj Pulsar 150cc Connecting Rod Using ANSYS 14.0. Asian Journal of Engineering and Applied Technology, 3(2), 19–24. https://doi.org/10.51983/ajeat-2014.3.2.727

Issue

Vol. 3 No. 2 (2014): July-December 2014

Section

Articles

License

Copyright (c) 2014 The Research Publication

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.