Study on Steel Fibre Reinforced Self Compacting Concrete

Authors

  • A. Venkateshwaran PG Student, Department of Civil engineering, College of Engineering Guindy, Chennai, Tamil Nadu, India
  • K. Nandhini Research Scholar, Department of Civil engineering, College of Engineering Guindy, Chennai, Tamil Nadu, India
  • V. Ponmalar Associate Professor, Department of Civil engineering, College of Engineering Guindy, Chennai, Tamil Nadu, India

DOI:

https://doi.org/10.51983/ajeat-2018.7.1.871

Keywords:

Micro Silica, Nano Silica, Passing Ability, SCC, Steel Fibre

Abstract

Self Compacting Concrete (SCC) consists of a higher amount of fine content and admixtures, thus eliminating the time for compaction and labour cost. Micro silica is a by-product of the industrial manufacture of ferrosilicon and metallic silicon that is been made in high-temperature electric arc furnace. The ferrosilicon is drawn from 2000°C furnace, thus after when it cools down, the particles are condensed and are trapped in huge cloth bags. The condensed fume is processed by removing impurities and thus micro silica is being formed. Micro silica, as a waste by-product, being used for land filling, instead it can be used as an additive to concrete. The overall weight of the concrete increases up to 15 percent, thus increasing the unit weight of concrete. In addition, nano silica and steel fibres have been used to improve the strength and durability of concrete. Addition of silica to a concrete mix alters the cement paste structure. The resulting paste contains more of the calcium-silicate hydrates and less of the easily soluble calcium hydroxides. Due to its smaller size particle distribution, they disperse among and separate the cement particles. In the present study, different mix ratio using micro silica, nano silica and steel fibres has been prepared to study the fresh and hardened properties of SCC respectively.

References

EFNARC, "Specification & Guidelines for self-compacting concrete," English ed., Norfolk, UK: European Federation for Specialist Construction Chemicals and Concrete Systems.

Heidari, Ghaffari, and Ahmadvand, "Properties of Self-compacting Concrete Incorporating Alginate and Nano Silica," Asian Journal of Civil Engineering (BHRC), vol. 16, no. 1, 2015.

M. Iyappan and J. Jagannathan, "High Strength Self-Compacting Concrete with Nanosilica," International Journal of Emerging Trends in Engineering and Development, vol. 5, issue 4, ISSN 2249-6149, 2014.

Jeevetha, S. Krishnamoorthi, and G. S. Rampradheep, "Study on Strength Properties of Self-Compacting Concrete with Micro Silica," International Journal of Innovative Research in Science, Engineering and Technology, ISSN: 2319-8753, vol. 3, issue 4, April 2014.

Maghsoudi, M. Maghsoudi, and M. Noori, "Effect of Nano Particles on SCC," presented at the 2nd Int. Conf. on Sustainable Construction Materials and Technologies, ISBN 978-1-4507-1488-4, June 2010.

M. Jalal, A. R. Pouladkhan, A. A. Ramezanianpour, and H. Norouzi, "Effects of Silica Nanopowder and Silica Fume on Rheology and Strength of High Strength Self-Compacting Concrete," Journal of American Science, vol. 8, no. 4, 2012.

S. Korkmaz and F. Birinci, "Increasing the Tensile Strength of Fiber Reinforced Self-Compacting Concrete and Effects of Fiber Type and Orientation," Romanian Journal of Materials, vol. 47, no. 3, pp. 361-369, 2017.

Downloads

Published

23-01-2018

How to Cite

Venkateshwaran, A., Nandhini, K., & Ponmalar, V. . (2018). Study on Steel Fibre Reinforced Self Compacting Concrete. Asian Journal of Engineering and Applied Technology, 7(S1), 11–15. https://doi.org/10.51983/ajeat-2018.7.1.871

Issue

Vol. 7 No. S1 (2018): Special Issues April 2018

Section

Articles

License

Copyright (c) 2018 The Research Publication

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.