Mechanical Assisted Modification of Halloysite Nano Clay: Characterization and Its Effect on Mechanical Properties of Halloysite-Epoxy Nano Composites
DOI:
https://doi.org/10.51983/ajeat-2019.8.1.1063Keywords:
Modified Halloysite Clay, Epoxy Nano Composites, Mechanical Properties, Ultrasonication, Clay ConcentrationAbstract
Modificationof Halloysite nano clay has been done using 3-aminopropyltriethoxysilane in the presence of distilled water as solvent media. Untreated and modified nano clay was characterized by Powder X-ray diffractometer (PXRD), Scanning Electron Microscope (SEM), Fourier Transform Infrared Spectroscopy (FT-IR). Functionalization of Halloysite nano clay is also strongly affected the morphological parameters and enabling the application in epoxy nano composite. However, the influence of modified clay concentration on the mechanical properties of epoxy/nanoclay composites, with different concentrations (2%, 3%, 4% and 5%) of nano clay in the epoxy resin was investigated. Experimental results showed that the mechanical properties of epoxy were improved upto 4 wt% of HNP’s, evidently because of the loading of modified clay. The tensile strength, tensile Modulus, flexural strength, flexural modulusand fracture toughness of the nanocomposites increased by 13%, 17%, 9%, 14%and 27% respectively this demonstrated that the composites were strengthened.
References
B. Guo et al., "Styrene-butadiene rubber/ halloysite nanotubes nanocomposites modified by methacrylic acid," Appl. Surf. Sci., vol. 255, pp. 2715–22, 2008.
M. Du et al., "Thermal stability and flame retardant effects of halloysite nanotubes on poly(propylene)," EurPolym J., vol. 42, pp. 1362–9, 2006.
M. Liu et al., "Properties of halloysite nanotube -epoxy resin hybrids and the interfacial reactions in the systems," Nano tech., vol. 18, pp. 455703–12, 2007.
Y. Ye et al., "High impact strength epoxy nanocomposites with natural nanotubes," Polymer, vol. 48, pp. 6426–33, 2007.
S. Deng et al., "Toughening epoxies with halloysite nanotubes," Poly., vol. 49, pp. 5119–27, 2008.
DCO. Marney et al., "The suitability of halloysite nanotubes as a fire retardant for nylon 6," PolymDegradStabil., vol. 93, pp. 1971–8, 2008.
H. Ismail et al., "Morphological, thermal and tensile properties of halloysitenanotubes filled ethylene propylene diene monomer (EPDM) nanocomposites," Polym Test, vol. 27, pp. 841–50, 2008.
K. Hedicke-Hochstotter et al., "Novel polyamide nanocomposites based on silicate nanotubes of the mineral halloysite," Comp SciTechnol, vol. 69, pp. 330–4, 2009.
B. Guo et al., "Crystallization behaviour of polyamide 6/halloysite nanotubes nanocomposites," ThermochimActa., vol. 484, pp. 48–56, 2008.
M. Du et al., "Carboxylated butadiene-styrene rubber/ halloysite nanotube nanocomposites: interfacial interaction and performance," Poly., vol. 49, pp. 4871–6, 2008.
S. Deng et al., "Halloysite–epoxy nanocomposites with improved particle dispersion through ball mill homogenisation and chemical treatments," Composites Sci.Tech., vol. 69, pp. 2497–2505, 2009.
A.N.E. Luciana Guimaraes et al., "Structural, electronic, and mechanical properties of single-walled halloysite nanotube models," J.Phys. Chem. C., vol. 114, pp. 11358–11363, 2010.
C.N.R. Rao et al., "Size dependent chemistry: properties of nanocrystals," Eur. J. – Wiley Online Libr., vol. 8, pp. 29–35, 2002.
M. Aly et al., "Effect of nano clay particles on mechanical, thermal and physical behaviours of waste-glass cement mortars," Mater. Sci. Eng. A., vol. 528, pp .7991–7998, 2011.
RL. Frost et al., "Modification of low- and high-defect kaolinite surfaces: implications for kaolinite mineral processing," J. Colloid Int. Sci., vol. 270, pp. 337–46, 2004.
B. Wetzel et al., "Epoxy nanocomposites – fracture and toughening mechanisms," Eng. Fract. Mech., vol. 73, pp. 2375–98, 2004.
Peng Yuan et al., "Functionalization of Halloysite Clay Nanotubes by Grafting with γ-Aminopropyltriethoxysilane," J. Phys. Chem. C., vol. 112, pp. 15742–15751, 2008.
V. Khunova et al., "The effect of halloysite modification combined with in situ matrix modifications on the structure and properties of polypropylene/halloysitenanocomposites," eXPRESS Poly. Lett., vol. 7, pp. 471–479, 2013.
Youhong Tang et al., "Influences of processing methods and chemical treatments on fracture toughness of halloysite–epoxy composites," Mat. Desi., vol. 42, pp. 471–477, 2012.
Yang Meng et al., "Preparation of Robust SuperhydrophobicHalloysite Clay Nanotubes via Mussel-Inspired Surface Modification," Appl. Sci., vol. 7, pp .1129, 2009.
A.M. Shanmugharaj et al., "Influence of dispersing medium on grafting of aminopropyltriethoxysilane in swelling clay materials," J. Coll. Interf. Sci., vol. 298, pp. 854–859, 2006.
N. Raghavendra et al., "Effect of Nanoclays on the performance of Mechanical, Thermal and Flammability of Vinylester based nanocomposites," Mat. Today: Proce., vol. 4, pp. 12109-12117, 2017.
N. Raghavendra et al., "Mechanical Behavior of Organomodified Indian Bentonite NanoclayFibre Reinforced Plastic Nanocomposites," J. Front. Mat. Sci., vol. 7, pp. 396-404, 2013.
S. Zainuddina et al., "Experimental and numerical investigations on flexural and thermal properties of nanoclay–epoxy nanocomposites," Mat. Sci. Eng. A., vol. 527, pp. 7920–7926, 2010.
M. Bakar et al., "Preparation and Properties Evaluation of Thermoplastic Modified Epoxy Nanocomposites," Journal of Macromolecular Science, Part B: Physics, vol. 51, pp. 1159–1171, 2012.
B. Qi et al., "Investigation of the mechanical properties of DGEBA-based epoxy resin with nanoclay additives," Comp. Struct., vol. 75, pp. 514–519, 2006.
Youhong Tang et al., "Effects of unfolded and intercalated halloysites on mechanical properties of halloysite–epoxy nanocomposites," Composites: Part A., vol. 42, pp. 345–354, 2011.
GulcihanGuzel Kaya et al., "Sustainable bean pod/calcined kaolin reinforced epoxy hybrid composites with enhanced mechanical, water sorption and corrosion resistance properties," Constr. Build. Mat., vol. 162, pp. 272–279, 2018.
Tri-Dung Ngo and Minh-Tan Ton-That, "Wet process and exfoliation of clay in epoxy," Korean J. Chem. Eng., vol. 33, pp. 3550-3557, 2016.
GhaderKhanbabaei et al., "Preparation and Properties of Epoxy‐Clay Nanocomposites," J. Macromolecular Scie. Part B: Physics., vol. 46, pp. 975–986, 2007.
M. Rudresh and B. H. Maruthi, "Effect of PMMA on Microstructure and Mechanical Properties of Epoxy Polymer Blends," International Journal of Research in Advent Technology, vol. 6, pp. 1954-1959, 2018.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2019 The Research Publication
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
