Experimental Investigation of Fluid Flow and Heat Transfer in Microchannels

Authors

  • Rajesh Sharma ME, Depatment, CCET, Chandigarh – 160 026, India
  • Balkar Singh Punjab Technical University, Jalandhar, India
  • Vijay Kumar Jadon Gian Jyoti Group of Institutes, Shambu Kalan, Banur, Punjab, India

DOI:

https://doi.org/10.51983/ajeat-2013.2.2.665

Keywords:

Microchannel;, Electronics cooling, liquid cooling, Heat flux, Heat sink

Abstract

An experimental investigation was conducted to explore the characteristics of fluid flow and heat transfer in rectangular microchannels using water as a working fluid in single-phase flow. The micro channels considered having width of 350 microns; with the channel depth 2.5 mm. Test piece was made of copper and contained twenty three microchannels in parallel. The experiments were conducted with water, with the Reynolds number ranging from 375 to 2000. Numerical predictions obtained based on a classical, continuum approach were found to be in good agreement with the experimental data, suggesting that a conventional analysis approach can be employed in predicting heat transfer behavior in microchannels of the dimensions considered in this study.

References

S.B. Choi, R.F. Barron, R.O. Warrington(1991) “Fluid flow and heat transfer in micro tubes”, Micromesh. Sensors Actuat. Syst. ASME DSC 32 pp.123–134.

X.F. Peng, G.P. Peterson, B.X. Wang(1994), “Heat transfer characteristics of water flowing through microchannels”, Exp. Heat Transfer, pp.265–283.

X.F. Peng, G.P. Peterson(1996), “Convective heat transfer and flow friction for water flow in microchannel structures”, Int. J. Heat Mass Transfer, Vol. 39 pp.2599–2608.

G.M. Mala, M. Li (1999), “Flow characteristics of water in micro tubes”, Int. J. Heat Fluid Flow 20 pp.142–148.

G.M. Mala, D. Li, J.D. Dale(1997), “Heat transfer and fluid flow in microchannels”, Int. J. Heat Mass Transfe, Vol. 40 pp.3079–3088.

I. Papautsky, B.K. Gale, S. Mohanty (2000), T.A. Ameel, A.B. Frazier, Effects of rectangular microchannel aspect ratio on laminar friction constant, unpublished, from authors website.

D.B. Tuckerman, R.F.W. Pease (1981), “High-performance heat sinking for VLSI”, IEEE Electron Dev. Lett. Vol.2 pp. 126– 129.

X.F. Peng, G.P. Peterson(1994), B.X. Wang, Frictional flow characteristics of water flowing through microchannels, Exp. Heat Transfer 7 249–264.

B. Xu, K.T. Ooi, N.T. Wong, W.K. Choi(2000), “Experimental investigation of flow friction for liquid flow in microchannel”s, Int. Comm. Heat Mass Transfer, Vol. 27, pp. 1165–1176.

D. Liu, S.V. Garimella(2004), “Investigation of liquid flow in microchannels”, AIAA J. Thermophys. Heat Transfer, Vol. 18 pp. 65– 72.

J. Judy, D. Maynes, B.W. Webb(2002), “Characterization of frictional pressure drop for liquid flows through microchannels”, Int. J. Heat Mass Transfer, Vol. 45, pp. 3477–3489.

A. Popescu, J.R. Welty, D. Pfund, D. Rector, “Thermal measurements in rectangular microchannels”, Proceedings of IMECE2002, IMECE2002-32442, 2002.

Downloads

Published

05-11-2013

How to Cite

Sharma, R., Singh, B., & Jadon, V. K. (2013). Experimental Investigation of Fluid Flow and Heat Transfer in Microchannels. Asian Journal of Engineering and Applied Technology, 2(2), 58–62. https://doi.org/10.51983/ajeat-2013.2.2.665